2018-ban kiadott európai szabvány jellegű dokumentumok (CEN)

– Műszaki specifikációk –


A műszaki specifikációkat (CEN/TS-eket) például az európai piac fejlődésének támogatását célzó témakörök szempontjainak közzétételére, az előírásokra és kapcsolódó vizsgálati módszerekre vonatkozó piaci iránymutatáshoz, valamint a kísérleti körülmények és/vagy fejlődő technológiák előírásainak megalkotására hozzák létre.

A műszaki specifikációk megvásárolhatók az MSZT Szabványboltjában vagy megrendelhetők a kiado@mszt.hu e-mail-címen a Megrendelőlap kitöltésével.

Érdeklődés esetén a CEN/TS-ek nemzeti szabványként való bevezetésére, illetve további információkért kérjük, keresse munkatársainkat az alábbi elérhetőségen:
szabvtit@mszt.hu

Hivatkozási szám és cím

Témakör

CEN ISO/TS 14027:2018
Environmental labels and declarations. Development of product category rules (ISO/TS 14027:2017)

Környezetvédelem

CEN/TS 15119-1:2018
Durability of wood and wood-based products. Determination of emissions from preservative treated wood to the environment. Part 1: Wood held in the storage yard after treatment and wooden commodities exposed in Use Class 3 (not covered, not in contact with the ground). Laboratory method

CEN ISO/TS 15874-7:2018
Plastics piping systems for hot and cold water installations. Polypropylene (PP). Part 7: Guidance for the assessment of conformity (ISO/TS 15874-7:2018)

Műanyag csövek és csőidomok

CEN ISO/TS 15875-7:2018
Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X). Part 7: Guidance for the assessment of conformity (ISO/TS 15875-7:2018)

CEN ISO/TS 15876-7:2018
Plastics piping systems for hot and cold water installations. Polybutylene (PB). Part 7: Guidance for the assessment of conformity (ISO/TS 15876-7:2018)

CEN ISO/TS 22391-7:2018
Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT). Part 7: Guidance for the assessment of conformity (ISO/TS 22391-7:2018)

CEN ISO/TS 15877-7:2018
Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C). Part 7: Guidance for the assessment of conformity (ISO/TS 15877-7:2018)

CEN/TS 1329-2:2018
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Part 2: Guidance for the assessment of conformity

CEN ISO/TS 19293:2018
Health informatics. Requirements for a record of the dispense of a medicinal product (ISO/TS 19293:2018)

Egészségügyi informatika

CEN ISO/TS 20443:2018
Health informatics. Identification of medicinal products. Implementation guidelines for ISO 11615 data elements and structures for the unique identification and exchange of regulated medicinal product information (ISO/TS 20443:2017)

CEN ISO/TS 20451:2018
Health informatics. Identification of medicinal products. Implementation guidelines for ISO 11616 data elements and structures for the unique identification and exchange of regulated pharmaceutical product information (ISO/TS 20451:2017)

CEN/TS 16826-3:2018
Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for snap frozen tissue. Part 3: Isolated DNA

CEN ISO/TS 19397:2018
Determination of the film thickness of coatings using an ultrasonic gage (ISO/TS 19397:2015)

Festékek és lakkok

CEN/TS 927-9:2018
Paints and varnishes. Coating materials and coating systems for exterior wood. Part 9: Determination of pull-off strength after water exposure

CEN ISO/TS 21623:2018
Workplace exposure. Assessment of dermal exposure to nano-objects and their aggregates and agglomerates (NOAA) (ISO/TS 21623:2017)

Levegőminőség

CEN/TS 17198:2018
Stationary source emissions. Predictive Emission Monitoring Systems (PEMS). Applicability, execution and quality assurance

CEN ISO/TS 21719-1:2018
Electronic fee collection. Personalization of on-board equipment (OBE). Part 1: Framework (ISO/TS 21719-1:2018)

Intelligens közlekedési rendszerek

CEN ISO/TS 21719-2:2018
Electronic fee collection. Personalization of on-board equipment (OBE). Part 2: Using dedicated short-range communication (ISO/TS 21719-2:2018)

CEN/TS 17148:2018
Intelligent Transport Systems. eSafety. ProForma eCall Agreement between TPSP and PARES

CEN/TS 17182:2018
Intelligent transport systems. eSafety. eCall via an ITS-station

CEN/TS 17184:2018
Intelligent transport systems. eSafety. eCall High level application Protocols (HLAP) using IMS packet switched networks

CEN/TS 17234:2018
Intelligent transport systems. eSafety. eCall: Tests to enable PSAPs to demonstrate conformance and performance

CEN/TS 17240:2018
Intelligent transport systems. ESafety. ECall end to end conformance testing for IMS packet switched based systems

CEN/TS 17249-2:2018
Intelligent transport systems. eSafety. Part 2: eCall for HGVs and other commercial vehicles

CEN/TS 17249-3:2018
Intelligent transport systems. eSafety. Part 3: eCall for Coaches and buses

CEN/TS 17268:2018
Intelligent transport systems. ITS spatial data. Data exchange on changes in road attributes

CEN ISO/TS 25108:2018
Non-destructive testing. NDT personnel training organizations (ISO/TS 25108:2018)

Roncsolásmentes vizsgálat

CEN/TS 12697-50:2018
Bituminous mixtures. Test methods. Part 50: Resistance to scuffing

Útépítési anyagok

CEN/TS 16786:2018
Road restraint systems. Truck Mounted Attenuators. Performance classes, impact test acceptance criteria and test performance

Úttartozékok és jelzések

CEN/TS 13445-501:2018
Unfired pressure vessels. Part 501: Acoustic emission for pressure vessels

Folyadék- és gáztartályok

CEN/TS 1459-8:2018
Rough-terrain trucks. Safety requirements and verification. Part 8: Variable-reach tractors

Ipari targoncák

CEN/TS 16244:2018
Ventilation in hospitals. Coherent hierarchic structure and common terms and definitions for a standard related to ventilation in hospitals

Hőellátás, fűtés- és légtechnika

CEN/TS 17153:2018
Ventilation for buildings. Correction of air flow rate according to ambient conditions

CEN/TS 16637-1:2018
Construction products. Assessment of release of dangerous substances. Part 1: Guidance for the determination of leaching tests and additional testing steps

Levegőminőség;
Környezetállósági vizsgálatok;
Építőanyagok

CEN/TS 16675:2018
Waste. Test methods for the determination of the monolithic status of waste to be landfilled

Talajminőség és talajvédelem

CEN/TS 16818:2018
Durability of wood and wood-based products. Moisture dynamics of wood and wood-based products

Fa féltermékek

CEN/TS 16931-3-2:2017/AC:2018
Electronic invoicing. Part 3-2: Syntax binding for ISO/IEC 19845 (UBL 2.1) invoice and credit note

Elektronikus számlázás

CEN/TS 17091:2018
Crisis management. Guidance for developing a strategic capability

Vállalatszervezés és -irányítás

CEN/TS 17158:2018
Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)). Determination of particle size of lignocellosic material

Műanyagok

CEN/TS 17159:2018
Societal and citizen security. Guidance for the security of hazardous materials (CBRNE) in healthcare facilities

Magánbiztonsági szolgáltatások

CEN/TS 17165:2018
Light and lighting. Lighting system design process

Világítástechnika

CEN/TS 17171:2018
Management of observed hydrometric data. Guidance

Térfogatáram-mérés

CEN/TS 17174:2018
Animal feeding stuffs: Methods of sampling and analysis. Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals

Takarmányok. Mintavétel és vizsgálati módszerek

CEN/TS 17188:2018
Materials obtained from end of life tyres (ELT). Sampling method for granulates and powders stored in big-bags

Hulladékok;
Gumiabroncsok

CEN/TS 17189:2018
Materials obtained from end of life tyres (ELT). Determination of the true density of granulates. Method based on water pycnometry

CEN/TS 17195:2018
Construction products: Assessment of release of dangerous substances. Analysis of inorganic substances in eluates

Építőanyagok

CEN/TS 17196:2018
Construction products: Assessment of release of dangerous substances. Digestion by aqua regia for subsequent analysis of inorganic substances

CEN/TS 17197:2018
Construction products: Assessment of release of dangerous substances. Analysis of inorganic substances in digests and eluates. Analysis by Inductively Coupled Plasma. Optical Emission Spectrometry (ICP-OES)

CEN/TS 17197:2018+AC:2018
Construction products: Assessment of release of dangerous substances. Analysis of inorganic substances in digests and eluates. Analysis by Inductively Coupled Plasma. Optical Emission Spectrometry (ICP-OES)

CEN/TS 17200:2018
Construction products: Assessment of release of dangerous substances. Analysis of inorganic substances in digests and eluates. Analysis by Inductively Coupled Plasma. Mass Spectrometry (ICP-MS)

CEN/TS 17200:2018+AC:2018
Construction products: Assessment of release of dangerous substances. Analysis of inorganic substances in digests and eluates. Analysis by Inductively Coupled Plasma. Mass Spectrometry (ICP-MS)

CEN/TS 17201:2018
Construction products: Assessment of release of dangerous substances. Content of inorganic substances. Methods for analysis of aqua regia digests

CEN/TS 17201:2018+AC:2018
Construction products: Assessment of release of dangerous substances. Content of inorganic substances. Methods for analysis of aqua regia digests

CEN/TS 17216:2018
Construction products. Assessment of release of dangerous substances. Determination of activity concentrations of radium-226, thorium-232 and potassium-40 in construction products using semiconductor gamma-ray spectrometry

CEN/TS 17217:2018
Postal services. Reverse envelope. Design and printing requirements

Postai szolgáltatások

CEN/TS 17261:2018
Biometric authentication for critical infrastructure access control. Requirements and Evaluation

Információtechnológia alkalmazása

CEN/TS 17262:2018
Personal identification. Robustness against biometric presentation attacks. Application to European Automated Border Contro

CEN/TS 17273:2018
Nanotechnologies. Guidance on detection and identification of nano-objects in complex matrices

Nanotechnológia

CEN/TS 17274:2018
Nanotechnologies. Guidelines for determining protocols for the explosivity and flammability of powders containing nano-objects (for transport, handling and storage)

CEN/TS 17275:2018
Nanotechnologies. Guidelines for the management and disposal of waste from the manufacturing and processing of manufactured nano-objects

CEN/TS 17276:2018
Nanotechnologies. Guidelines for Life Cycle Assessment. Application of EN ISO 14044:2006 to Manufactured Nanomaterials

CEN/TS 54-14:2018
Fire detection and fire alarm systems. Part 14: Guidelines for planning, design, installation, commissioning, use and maintenance

Tűzvédelem